What's New

Stop Rust Permanently!

Full line of Por 15 Products Available

RestOMotive Laboratories products are designed to work as a complete system. When used together, these products provide you with a coating that will not only stop rust, but will prevent it from returning. To aid you in your particular rusty metal project, we have included the following steps to explain the various stages in rust prevention. All RestoMotive Laboratories products are available individually and many are available in efficient, cost saving kits geared to your specific restoration need. Here is how the system works.

Degrease & Clean Surface Clean the rusty metal surface with Marine Clean degreaser/cleaner. An environmentally safe cleaner, Marine Clean will remove dirt, grease, wax or other contaminants that could interfere with the restoration.

Neutralize Rust; Etch MetalPrepare the rusty metal surface with Metal-Ready. As a rust remover, Metal-Ready will neutralize rust, etch metal for better adhesion, and coat the metal with zinc phosphate to encourage deep chemical bonding of POR-15 to the base metal and rust.

Apply rust preventive Coating to Surface Seal the rusty metal with POR-15 Rust Preventive Coating. As the moisture resistant POR-15 bonds to the rusty metal, it will form an unbelievably tough, almost ceramic-like finish that will not crack, chip or peel.

Topcoat the Surface Topcoat the metal surface with Chassis Coat Black. The semi-gloss Chassis Coat Black provides the frame, chassis and underbody finish desired by most restorers as it protects the underlying POR-15 from harmful UV light.